광학 미러와 관련된 문의들이 점점 늘고 있다.
문제는 굉장히 high-spec이라는거... ^^;
아쉽게도 저런 형태의 전반사 거울은 국내에서는 제작이 불가능할 것이다.
일단 크기도 문제이지만 반사율을 Linear하게 조정한다는 것이 쉽지 않다.
3D 홀로그램용으로 렌즈를 이용한 것은 해본 적이 있지만, 이렇게 미러를 이용하는 것은 어떤 방식인지 궁금하다.
-----
Dear S,
Our First surface mirror has single reflective, which is higher than 94% at 45 degree.
I am sorry but we don’t have a product or facility to build a mirror as your request.
Thank you for finding us.
Regards,
------------
Hello,
An associate and I are in the process of setting up a company called Innerscene, with one specific goal in mind; to continue to develop and eventually commercialise a new form of 3D display system, a crucial component of which is a rectangular light guide. The guide consists of two, first surface mirrors. One of them should ideally be what we refer to as, a graded mirror i.e. its reflectivity diminishes along its length. This we acknowledge may pose quite a challenge, and if grading is possible may set a precedent in terms of its size (equivalent to a 42" screen with a 16:9 aspect ratio).
The graded mirror's reflectivity should vary from 85% at its highest, to 15% at its lowest (or you could say, it should go from being 15% transmissive, to 85%) and the reduction rate should be linear.
Is this something you can help us with? Although a small entity we are reasonably well resourced so please do not think we are operating on an impossibly tight budget (although we have a budget of course).
Hope to hear from you.
We can provide more details if you think you can meet this challenge.